Pressley - Code 231A

An instrument to determine the resistance of cotton fibers. It is fitted with clamps with space 0" and 1/8".For the use of PRESSLEY a torsion balance up to 5 mg and resolution 0.1 mg is necessary (code 259B).

Torsion Balance - Code 259

For the weighing of small quantities of fibers or tufts.

They are available in the following capacities:

5, 10, 25, 50, 100, 250, 500, and 1000 mg

Micronaire - Code 199A

An instrument to control the fineness of cotton fibers.

The tester is supplied with the pump for the aspirated air. For wool fibers, a special model called AIR-FLOW is available (code 272A).

With the MICRONAIRE and the AIR-FLOW, a high precision electronic balance with accuracy 0,01 g is necessary

Laboratory Carding Machine - Code 337A

Particularly suitable to prepare homogeneous colored fiber samples (felts).

Compact and totally protected model in accordance with CE safety rules.

The average production is about 4 Kg per hour.

Oil Extraction Apparatus - Code 273A

To obtain quickly (about 15 minutes) by cold processing the oil percentage present in fibers and yarns.With this instrument the use of an analytic balance with accuracy 0,0001 g is absolutely necessary.

Top Tester - Code 328A 

Instrument used for easy, rapid and accurate counting of the various impurities and neps in the tops.Model with 6 counters for the selection of 6 different defects.

Microscope Model Campus - Code 191D

Binocular model particularly suitable to control the fibers.

Thanks to the combination between eyepieces and lenses, magnifications varying from 40X to 1000X can be obtained.

Equipped with micrometric stage carrier for object prospecting.

Possibility to apply a Reflex type camera.

Lanametro MP3 - Code 187A

Projection microscope on graduated Microns dial suited to the measurement of the fiber fineness.Revolver suitable for 4 fixed-focus lenses for 125X - 250X - 500X and 1000X.

Microtome - Code 256A

Hand-driven model for the exact preparation of sections of fiber samples for microscopical analysis.

Electronic Wrap Reel For Slivers & Rovings

Available with drum circumference either 1 yard (code 254B) or 1 meter (code 254A). Adjustable drum speed from 0 to 100 m/min., with accuracy of =/- 1 cm; equipped with cutter. Particularly suited to customers wishing to have a perfect preparation without wrong ironing of the sliver sample to be tested.

"Romana" For Slivers & Rovings

To determine the count of slivers and rovings. The scale from Ne 0,08 to 2 with sample length of 7 yards is available for the cotton field (code 162B), while for the wool field there is a scale from Nm 0,10 to 1 with sample length of 10 m.

Special scales are available on specific request.

Testing Reel

Hand driven reel for slivers and rovings. Available with drum circumference of 1 meter (code 159A) or 1 yard (code 159B).

"Romana" For Noils - Code 164A

Suitable to determine the noils percentage. Equipped with 2 reading scales from 0 to 100% and from 0 to 500 g.

Double comb sorter - Code 230A

For the production of staple diagrams from short and medium staple fibres up to 100 mm (4") length. For long staple fibres, up to 250 mm (10") length, an alternative model, Code 230B, is available. Built in accordance with: ISO 920, ASTM D 1440/1575, IWTO 1 -66 Net weight: Kg 4.5 Dimensions: (L)250x(W)150x(H)140 mm.

NATI Instrument (NEPS & Trash Indicator) - Code 3280

For objective and quick counting of neps and trash in slivers from carding, combing machines and drawing frames. Collected data is essential for the determination of raw material quality and the wear conditions of the clothing on both carding and combing machines.

Being very lightweight (Kg 20), it is easily trasportable and can be used near to the production machine.

The device is fitted with a suction system, for use with a 220 V 50/60 Hz supply.
Principle features:

• Performance speed: the analysis of 1 meter sliver sample takes less than two minutes.
• Data repeatability: manual preparation of sample does not influence final result.
• Reading accuracy: besides the classical counting of neps over 0.7 mm, it is also able to read neps > 0.5 mm. As concerns trash, it is divided in two classes: >0.25 mm, >0.5 mm.

Trash Analizer C - Code 281A

To determine the percentage content of trash, lint, and non-fibre material in cotton samples up to 100 gr.Power supply: 380V, 50 Hz, three-phase Net weight: Kg 100 Dimensions: (L)750x(W)1000x(H)600 mm.

Trash Analizer W - Code 281 B

To determine the content of vegetable and other extraneous materials in samples of raw wool, tops and waste.
Power supply: 380V, 50 Hz, three-phase Net weight: Kg 100 Dimensions: (L)750x(W)1000x(H)600 mm.

Light magnifying glass - Code 328.2

Equipped with table clamp.
Magnification: 3X
Lamp diameter: 80 mm
Power supply: single phase, 220V, 50 Hz Net weight: Kg 3.2 Dimensions: (L)560x(W)230x(H)120 mm.