| Pressley - Code 231A |
 |
- An instrument to determine the resistance of cotton fibers. It is fitted
with clamps with space 0" and 1/8".
- For the use of PRESSLEY a torsion balance up to 5 mg and resolution
0.1 mg is necessary (code 259B).
|
|
|
| Torsion Balance - Code 259 |
|
- For the weighing of small quantities of fibers or tufts.
- They are available in the following capacities:
- 5, 10, 25, 50, 100, 250, 500, and 1000 mg
|
|
|
| Micronaire - Code 199A |
|
- An instrument to control the fineness of cotton fibers.
- The tester is supplied with the pump for the aspirated air. For wool
fibers, a special model called AIR-FLOW is available (code 272A).
- With the MICRONAIRE and the AIR-FLOW, a high precision electronic balance
with accuracy 0,01 g is necessary.
|
|
|
| Laboratory Carding Machine - Code 337A |
|
- Particularly suitable to prepare homogeneous colored fiber samples
(felts).
- Compact and totally protected model in accordance with CE safety rules.
- The average production is about 4 Kg per hour.
|
|
|
| Oil Extraction Apparatus - Code 273A |
|
- To obtain quickly (about 15 minutes) by cold processing the oil percentage
present in fibers and yarns.
- With this instrument the use of an analytic balance with accuracy 0,0001
g is absolutely necessary.
|
|
|
| Top Tester - Code 328A |
|
- Instrument used for easy, rapid and accurate counting of the various
impurities and neps in the tops.
- Model with 6 counters for the selection of 6 different defects.
|
|
|
| Microscope Model Campus - Code 191D |
|
- Binocular model particularly suitable to control the fibers.
- Thanks to the combination between eyepieces and lenses, magnifications
varying from 40X to 1000X can be obtained.
- Equipped with micrometric stage carrier for object prospecting.
- Possibility to apply a Reflex type camera.
|
|
|
| Lanametro MP3 - Code 187A |
|
- Projection microscope on graduated Microns dial suited to the measurement
of the fiber fineness.
- Revolver suitable for 4 fixed-focus lenses for 125X - 250X - 500X and
1000X.
|
|
|
| Microtome - Code 256A |
|
| Hand-driven model for the exact preparation of sections of fiber samples
for microscopical analysis. |
|
|
| Electronic Wrap Reel For Slivers & Rovings |
|
| Available with drum circumference either 1 yard (code 254B) or 1 meter (code
254A). Adjustable drum speed from 0 to 100 m/min., with accuracy of =/-
1 cm; equipped with cutter. Particularly suited to customers wishing to
have a perfect preparation without wrong ironing of the sliver sample to
be tested. |
|
|
| "Romana" For Slivers & Rovings |
|
- To determine the count of slivers and rovings. The scale from Ne 0,08
to 2 with sample length of 7 yards is available for the cotton field (code
162B), while for the wool field there is a scale from Nm 0,10 to 1 with
sample length of 10 m.
- Special scales are available on specific request.
|
|
|
| Testing Reel |
|
| Hand driven reel for slivers and rovings. Available with drum circumference
of 1 meter (code 159A) or 1 yard (code 159B). |
|
|
| "Romana" For Noils - Code 164A |
|
| Suitable to determine the noils percentage. Equipped with 2 reading scales
from 0 to 100% and from 0 to 500 g. |
|
|
| "Romana" For Noils - Code 164A |
|
| Suitable to determine the noils percentage. Equipped with 2 reading scales
from 0 to 100% and from 0 to 500 g. |
|
|
| Double comb sorter - Code 230A |
|
For the production of staple diagrams from short and medium staple fibres up to 100 mm (4") length. For long staple fibres, up to 250 mm (10") length, an alternative model, Code 230B, is available.
Built in accordance with: ISO 920, ASTM D 1440/1575, IWTO 1 -66 Net weight: Kg 4.5 Dimensions: (L)250x(W)150x(H)140 mm.
|
|
|
| NATI Instrument (NEPS & Trash Indicator) - Code 3280 |
|
For objective and quick counting of neps and trash in slivers from carding, combing machines
and drawing frames. Collected data is essential for the determination of raw material quality
and the wear conditions of the clothing on both carding and combing machines.
Being very lightweight (Kg 20), it is easily trasportable and can be used near to the production
machine.
The device is fitted with a suction system, for use with a 220 V 50/60 Hz supply.
Principle features:
- Performance speed: the analysis of 1 meter sliver sample takes less than two minutes.
- Data repeatability: manual preparation of sample does not influence final result.
- Reading accuracy: besides the classical counting of neps over 0.7 mm, it is also able
to read neps > 0.5 mm. As concerns trash, it is divided in two classes: >0.25 mm, >0.5 mm.
The device has a display for single data reading of Neps and Trash.
Optional: possibility for linkage to a printer for the reading of statistical data (average,
standard deviation, CV%) every 5 tests. Fitted with RS232C output.
Net weight: Kg 20
Dimensions: (L)400x(W)300x(H)500 mm
|
|
|
| Trash Analizer C - Code 281A |
|
To determine the percentage content of trash, lint, and non-fibre material in cotton samples up to 100 gr.
Power supply: 380V, 50 Hz, three-phase Net weight: Kg 100 Dimensions: (L)750x(W)1000x(H)600 mm.
|
|
|
| Trash Analizer W - Code 281 B |
|
To determine the content of vegetable and other extraneous materials in samples of raw wool, tops and waste.
Power supply: 380V, 50 Hz, three-phase Net weight: Kg 100 Dimensions: (L)750x(W)1000x(H)600 mm.
|
|
|
| Light magnifying glass - Code 328.2 |
|
Equipped with table clamp.
Magnification: 3X
Lamp diameter: 80 mm
Power supply: single phase, 220V, 50 Hz Net weight: Kg 3.2 Dimensions: (L)560x(W)230x(H)120 mm.
|
|
|
